Skip to content
No products found
Use fewer filters or clear all
XRT Moto stocks a complete OEM spec catalogue of Orion kids electric bike parts for the e12x (24V, 250W, 12-inch), e16x (36V, 350W to 500W, 16-inch), e20x (48V, 500W, 20-inch), and e20x Full Suspension across both the 2023 RXB eForce and 2024 to 2025 eSeries generations. Every listing includes exact model and year compatibility data.
What Orion Kids Parts Are Most Frequently Replaced?
The five most commonly replaced components across all eSeries models are throttle assemblies (Hall sensor wear causing inconsistent speed response), battery packs (capacity decline after 300 to 500 charge cycles), brake pads (wear item, replace at under 1mm from original 3.5mm), tires and inner tubes (puncture and tread wear), and charge port assemblies (water intrusion damage). All five are stocked in consistent supply at xrtmoto.com.
From our experience with these parts, throttle issues are almost always the first fault a parent notices. The symptom is a bike that surges at low throttle inputs or fails to respond at the low end of the range. In our workshop this is almost always a Hall effect sensor failure inside the throttle assembly rather than a controller or wiring fault. An OEM replacement throttle resolves this in the majority of cases.
Which Parts Differ Between 2023 and 2024 to 2025 Models?
Electrical parts differ significantly between generations. The 2023 RXB eForce generation uses 2.35mm barrel charge port connectors and a specific UART LCD display protocol. The 2024 to 2025 Generation 3 to 4 eSeries models use weatherproof GX16 connectors. These are electrically incompatible. Controllers, displays, and wire harnesses must match the generation. Mechanical parts (tires, brakes, suspension, frame fasteners) are broadly compatible across both generations on matching wheel sizes.
The most common ordering error we see is a 2023 generation LCD display ordered for a 2024 to 2025 eSeries bike. The displays appear identical externally but use incompatible UART communication protocols. Always check the generation code (G1/G2 vs G3/G4) on the frame serial plate before ordering any electrical parts.
What Battery Specification Do Orion Kids eSeries Bikes Require?
e12x: 24V LiFePO4 in 5.2Ah standard or 8Ah extended, integrated BMS, 24V 2A charger. e16x X-models: 36V 8Ah LiFePO4, 36V 2A charger. e20x and e20x-FS: 48V in 5Ah or 8Ah, 48V 2A charger. Charge port: 2.35mm barrel connector on 2023 models, GX16 weatherproof on 2024 to 2025 models. Installing an incorrect voltage battery destroys the controller instantly. Always confirm voltage from the battery sticker.
What Brake Components Are Required for Each eSeries Model?
e12x and standard e16x: 140mm rotors, single-piston mechanical callipers, semi-metallic pads (45 to 55mm reach levers). e20x and e20x-FS: 160mm rotors, dual-piston hydraulic callipers, hydraulic fluid. Brake pads require replacement below 1mm from original 3.5mm on all models. Average interval: 200 to 300 miles for active use. Hydraulic systems require annual brake fluid inspection and bleeding when lever feel becomes spongy.
In our workshop, hydraulic brake bleed on the e20x is the Orion kids parts task parents most frequently request guidance on. We provide the complete bleed procedure free of charge at 1.708.710.2316 or via WhatsApp.
Parts by Category
eSeries Batteries and Chargers
e12x: 24V 5.2Ah or 8Ah LiFePO4. e16x X: 36V 8Ah. e20x: 48V 5Ah or 8Ah. Charger must match voltage exactly. 2023 models: 2.35mm barrel charge port. 2024 to 2025 models: GX16 weatherproof connector. Store at 60 to 80% charge. Never store depleted. BMS protects against overcharge, over-discharge, and thermal runaway.
eSeries Motors and Controllers
e12x: 250W motor, 15A controller at 24V. e16x standard: 350W motor, 20A at 36V. e16x X: 500W motor, 25A at 36V. e20x: 500W motor, 25A at 48V. All brushless rear hub with 5:1 planetary reduction. 9-pin waterproof phase/hall connector standard. Mode 1: ~8 mph. Mode 2: ~12 mph. Mode 3: 16 to 20 mph depending on model.
Frame and Hardware
Handlebars: 22.2mm diameter (e12x/e16x), 25.4mm (e20x). CNC foot pegs: steel spindles, aluminum platforms, replaceable traction pins. Polymer seats with integrated grab handles. All metric fasteners: M6 and M8. Threadlocker required on motor mounts, handlebar clamps, and brake calliper mounts.
Frequently Asked Questions
Which battery fits each eSeries model?
e12x: 24V 5.2Ah or 8Ah LiFePO4 with 2.35mm barrel connector (2023) or GX16 (2024 to 2025). e16x X-models: 36V 8Ah LiFePO4. e20x and e20x-FS: 48V 5Ah or 8Ah. Integrated BMS prevents overcharge, over-discharge, and thermal runaway. Confirm connector type (barrel vs GX16) before ordering — generation determines compatibility.
How do I identify the generation of my Orion kids bike?
Locate the serial number plate on the frame head tube. The plate shows model code (e12x/e16x/e20x), model year (2023/2024/2025), and generation code (G1/G2/G3/G4). G1 to G2 = 2023 to early 2024 eForce models with barrel charge ports. G3 to G4 = late 2024 to 2025 eSeries models with weatherproof GX16 charge ports. Generation determines all electrical compatibility.
Can I upgrade performance using Orion kids parts?
Yes. Available upgrades within the same voltage platform: higher Ah batteries for extended runtime (no system changes required), AX5 air fork upgrades for e16x and e20x models with standard forks, higher output motor options within the same voltage range (confirm controller amperage before ordering). Contact 1.708.710.2316 to verify upgrade compatibility for your specific model.
What is the Orion P code error and how is it resolved?
P code errors are controller fault signals on the LCD display. P01 is a motor phase sensor signal fault. P03 is a controller internal fault. XRT Moto stocks the dedicated Orion P Code Repair Kit providing the exact components to resolve both conditions accurately without replacing additional parts unnecessarily.
Are parts available for older 2023 models?
Yes. XRT Moto maintains separate inventory for 2023 RXB eForce including generation-specific charge ports, displays, and controller units. Mechanical parts (tires, brakes, suspension) are compatible across both generations. Confirm G1/G2 generation before ordering any electrical 2023 parts.
Does XRT Moto offer wholesale pricing on Orion kids parts?
Yes. Racing teams, riding schools, and dealers qualify for volume pricing. 5+ batteries: 10% discount. 10+ tire/tube sets: 15% discount. 20+ brake pad sets: 20% discount. Dealer accounts available for businesses with resale certificates. Contact inquiry@xrtmoto.com for dealer program details.
What is the best way to maintain Orion kids eSeries parts?
Charge battery after every session, store at 60 to 80% charge, check tire pressure before every ride, inspect brake pads every 50 hours, clean electrical connectors bi-monthly with contact cleaner, apply dielectric grease to all connections, replace fork seals on air fork models every 50 riding hours, and torque all fasteners to specification.
How quickly can Orion kids parts be shipped?
In-stock parts ordered before 2 PM EST ship same day via UPS/FedEx Ground with tracking. Standard ground delivery to most US addresses: 3 to 5 business days. Batteries ship ground only per lithium battery regulations. All electrical components ship in anti-static packaging.
Why Buy From XRT Moto
Complete Generation Coverage: Parts stocked for both 2023 RXB eForce and 2024 to 2025 eSeries generations.
Expert Compatibility Verification: Our team verifies generation fitment before shipping every order.
Same-Day Shipping: Orders before 2 PM EST ship same day with tracking confirmation.
OEM Spec Quality: Parts meeting original voltage ratings, connector types, and safety certifications.
Free Technical Support: Phone and WhatsApp guidance on installation and fault diagnosis.