Skip to content
No products found
Use fewer filters or clear all
XRT Moto carries comprehensive Apollo electric bike parts covering 24V to 36V LiFePO4 batteries, 150W to 350W brushless motor assemblies, 15A to 25A controllers, 140mm disc brake systems, front suspension fork options, throttle assemblies, 12-inch and 16-inch tires and Schrader valve tubes, and all frame hardware. Apollo parts share full cross-compatibility with Revvi, Senda, and Voltaic using Anderson PowerPole battery connectors and JST-SM signal wiring as shared standards.
What Apollo Parts Does XRT Moto Stock?
Apollo parts available at XRT Moto: 24V and 36V LiFePO4 batteries with integrated BMS, 150W to 350W brushless rear hub motor assemblies, 15A to 25A controllers, 140mm mechanical disc brake systems, front suspension fork upgrades, throttle assemblies (Hall-effect sensor type), 12-inch and 16-inch Black Cat tires, Schrader valve inner tubes, handlebar assemblies, CNC foot pegs, and seat components.
From our experience with the Apollo platform, the most common first repair is throttle assembly replacement. In our workshop, Apollo throttle issues almost always trace back to Hall effect sensor degradation from daily riding rather than any impact event. The symptom is inconsistent speed at low throttle input.
What Voltage System Do Apollo Bikes Use?
Standard Apollo 12-inch models use 24V lithium battery systems. Some configurations use 36V. Confirm voltage from the battery sticker before ordering any Apollo parts. Chargers must match: 24V 2A for 24V models, 36V 2A for 36V. Installing a higher voltage battery destroys the controller immediately. Ah capacity can be increased within the correct voltage.
The most common Apollo voltage error we see is customers ordering a 36V battery for a 24V model wanting more power. Higher voltage is not a plug-in upgrade — it requires a voltage-matched controller and motor to operate safely.
Are Apollo Parts Compatible With Revvi and Voltaic?
Many Apollo parts cross-reference with Revvi, Senda, and Voltaic components on matching voltage systems. Anderson PowerPole connectors for battery connections and JST-SM for signal wiring are shared standards across all four brands. Verify voltage, connector type, and physical dimensions before cross-brand substitution.
From our experience with Apollo cross-compatibility, we have resolved battery and controller replacements using Revvi spec components on matching 24V systems without modification in the majority of cases.
What Are the Most Commonly Replaced Apollo Parts?
Throttle assemblies (Hall sensor degradation), battery packs (300 to 500 cycle capacity decline), brake pads (replace below 1mm from 3.5mm original), tires and inner tubes, and charge port assemblies (moisture ingress). Throttle assemblies are the highest turnover Apollo parts on actively ridden bikes.
Parts by Category
Batteries and Chargers
24V LiFePO4 with BMS, 2.35mm barrel charge port, 24V 2A charger. 36V configurations use model-specific connectors. Store at 60 to 80% charge. Never store depleted. Mixing charger voltage permanently destroys the BMS.
Motors and Controllers
150W to 350W brushless rear hub, 9-pin waterproof phase/hall connector. Controllers: 15A to 25A, 3 to 6 speed modes. Anderson PowerPole battery connections, JST-SM signal wiring. Match voltage and amperage when replacing.
Brakes and Suspension
140mm mechanical disc, single-piston calliper, semi-metallic pads (replace below 1mm). Front fork upgrades available: 30mm stanchions, adjustable air preload. Fork seal replacement every 50 riding hours.
Frequently Asked Questions
Which Apollo parts are compatible with Revvi and Voltaic?
Many Apollo parts cross-reference with Revvi, Senda, and Voltaic components on matching voltage systems. Verify voltage, Anderson PowerPole connector specification, and physical dimensions before cross-brand substitution. Most substitution cases on matching 24V systems require no modification.
What voltage battery does an Apollo electric bike require?
Standard 12-inch Apollo models: 24V. Some configurations: 36V. Confirm from the battery sticker. Installing higher voltage destroys the controller immediately. Ah capacity can be increased within the correct voltage for longer runtime.
What are the most frequently replaced Apollo parts?
Throttle assemblies (Hall sensor wear), batteries (300 to 500 cycle decline), brake pads (below 1mm), tires/tubes (puncture and wear), charge ports (moisture damage). All five stocked at xrtmoto.com.
How do I fit Apollo parts at home?
Battery replacement, tyre changes, and throttle fitting are manageable at home with basic tools. Free installation guidance from our team at 1.708.710.2316 or WhatsApp. Controller and motor replacement — contact us for technical guidance before attempting.
What is the Apollo parts warranty at XRT Moto?
90-day on electrical components, 30-day on mechanical parts. Consumables not covered. Installation errors and water damage void coverage.
Are upgraded suspension forks available for Apollo bikes?
Yes. Front fork upgrades with 30mm stanchions and adjustable air preload available for rigid fork models. Delivers measurable improvement in trail handling. Confirm fork diameter compatibility before ordering.
What brake maintenance do Apollo bikes require?
Inspect pads every 50 riding hours. Replace below 1mm from original 3.5mm. Average interval: 200 to 300 miles for active use. Check cable tension monthly on mechanical disc systems. Adjust barrel adjuster before pad wear limit to maintain consistent lever feel.
Does XRT Moto offer bulk pricing on Apollo parts?
Yes. 5+ batteries: 10% discount. 10+ tire/tube sets: 15% discount. Dealer accounts available. Contact inquiry@xrtmoto.com.
Why Buy From XRT Moto
Cross-Platform Coverage: Apollo, Revvi, Senda, and Voltaic parts in one catalogue — prevents wrong-part orders.
Same-Day Shipping: Orders before 2 PM EST ship same day with tracking.
OEM Spec Quality: Parts meeting original voltage ratings, connector types, and certifications.
Free Technical Support: Compatibility verification and installation guidance at 1.708.710.2316.
Competitive Pricing: Factory-aligned pricing with no dealer markup.